Flex Adhesive Mortar

It is a cement based, polymer additive C2T grade adhesive moar with reduced slipping propeies and improved adhesive propeies.

Application areas:
To adhere coating materials such as Işıklar Isoclinker Panel System, facing brick, floor and wall tiles, natural stones, etc. on
interior and exterior horizontal and veical suaces of buildings.

Rapid Flex Adhesive Mortar
It is a cement-based, flexible adhesive with added propeies and reduced slipping, quick set propeies and high
performance.

Application areas:
It is used for the adhesion of the coating materials such as Işıklar Izoklinker Panel System, brick slips, paving and facing
bricks, natural stones etc. on the horizontal and veical suaces of the buildings in interior and exterior areas.

Flex Adhesive Mortar A2054
Cement based, polymer added, C2 TE S1 class adhesive moar with reduced slipping ,high adhesion and longer open hold time
propeies.

Application areas:
It is used for the adhesion of the coating materials such as Işıklar Izoklinker Panel System, brick slips, paving and facing bricks,
natural stonesetc on the horizontal and veical suaces of the buildings in interior and exterior areas.

Special Flex Joint Filler
It is a Cement based Polymer Added (CG2 WA GRADE) flex joint filling moar with reduced water absorption and high abrasion resistance
and improved propeies.

Application areas:
Wide (5-15mm) joint filling moar used in filling the joints of brick slips, floor and wall tiles, ceramics, paving slabs, marble, and
natural stones in all sizes on interior and exterior horizontal and veical suaces of buildings.

Hyperflex Adhesive Mortar
It is a cement based, polymer added and ultra-flexible adhesive moar in C2 TE S2 grade with reduced slip, extended
uncovered holding and high adhesion propeies.

Application areas:
It ensures superior peormance at interior and exterior areas, horizontal and veical suaces and for the adhesion of brick
slips, granites, marbles, natural stones, porcelain ceramics, ceramics etc. in all sizes. Thanks to its ultra-flexible structure, it is
used in the areas requiring high resistance, at high facades and on cement based plasters, cement finishes and concrete floors.

Heat Insulation Board Adhesive Mortar
It is a cement based adhesive moar with high adhesive propeies containing mineral fillings allowing for practical and easy application.

Application areas:
Used for interior and exterior building applications on suaces such as rendering and plastering moar, concrete, exposed
concrete, pumice concrete, briquee, brick, etc.

Heat Insulation Board Plaster Mortar
It is a cement based, high peormance, thermal insulation plate moar containing chemical additives and mineral fillings.

Application areas:
It is used in plaster applications of buildings which are covered with heat insulation panels built inside or outside.

Decrative Mineral Facade Cladding
Cement based polymer modified high peormance facade decorative plaster mortar.

Application areas:
It is used as final suacing material on external walls insulation systems of buildings

Ceramic Adhesive Mortar
It is a cement based, normal hardening, long lasting C1 class adhesive mortar.

Application areas:
Used for adhesion of ceramic, tile etc. materials to the horizontal and veical suaces on the interior and exterior walls of the
buildings.

Ceramic Joint Filler Mortar
Cement based polymer added CG1 class normal joint filler mortar.
Application areas:
Used for adhesion of ceramic, tile etc. materials to the horizontal and veical suaces on the interior and exterior walls of the
buildings

Ceramic Adhesive Mortar
It is a cement based, normal hardening, long lasting C1 class adhesive mortar.

Application areas:
Used for adhesion of ceramic, tile etc. materials to the horizontal and veical suaces on the interior and exterior walls of the
buildings.

Cement Based Facade Plaster (Machined)
It is a cement based, chemical added, long lasting, exterior plaster with high adhesion strength applied with machine.

Application areas:
It is applied to bricks, gas concrete, concrete, gross concrete, briquee, wall and ceiling suaces outdoors with machine.

Cement Based Interior Wall Plaster (Machined)
It is a cement based, chemical added, long lasting, interior plaster with high adhesion strength applied with machine.

Application areas:
It is applied to bricks, gas concrete, concrete, gross concrete, briquee, wall and ceiling suace indoors with machine and by
hand.

Ecoklinker Rough And Fine Insulation Plaster
It is a cement based, chemical added, long lasting, coarse and thin plaster with high adhesion strength.

Application areas:
It is applied to the interior and exterior wall suaces of all mineral based concrete suaces such as gas concrete, pumice,
brick etc. by machine or by hand.

Facing Brick Lay Mortar
It is a cement based practical and easily applied general purpose (type G) pressed brick lay mortar with chemical additives and
high adherence properties.

Application areas:
It is used in all kinds of interior and exterior suaces of the buildings, with all sizes of facing bricks.

Ecoklinker Adhesive Mortar
It is cement based, high peormance, containing chemical additives, C1 class adhesive mortar.

Application areas:
Used for production of Ecoklinker brick, gas concrete, ceramic, tile, etc. of different sizes and for their adhesion to surfaces.

Bims Mortar
A general-purpose moar with a cement base and added chemical additives, to lay pumice blocks featuring high adhesion

Application areas:
It is practical and easy to apply, suitable for use in laying pumice blocks and facing bricks on both interior and exterior
sides of buildings.

Thick Repair Mortar
It is a cement based, polymer added, hight performance, practical R2 class, easy to use thick repair mortar.

Application areas:
It is used in the repair of deep cracks and holes in the plaster on internal and external suaces, and as a leveling plaster on
concrete surfaces.

Repair Mortar Thin

It is a cement based, polymer added, high peormance, practicall R2 class, easy to use thin repair mortar.

Application areas:
It is used in the repair of deep cracks and holes in the plaster on internal and external suaces, and as a leveling plaster on
concrete surfaces.

Surface Hardener
It is a ready-to-use cement based hardening material which is applied by spraying on fresh concrete surfaces containing
chemical additives, basalt and silica aggregates.

Application areas:
It is applied to fresh concrete on the inner and outer suaces of workshops, energy stations, garages, car washes, warehouses,
loading ramps, factories, airplane hangars, to prevent abrasion resistance and suace dusting.

Gas Concrete Mortar

It is cement based, high peormance, practical and easy to use, gas concrete lay moar containing chemicals that improve processability.

Application areas:

It is used for masonry work with gas concrete.

Double Component Cement and Acrylic Based Elastic Water İnsulation Mortar

It is a two component super elastic waterproofing material containing cement and acrylic based waterproofing additives.

Application areas:

It is vertically and horizantally used in cement based surfaces of wet areas, swimming, pools, basic isolations, terraces, balconies (covering the top) and surfaces that are in contact with water at all times.

Anchor Mortar

It is a cement based anchor moar consisting of high quality granulometric sand, special type of cement and high quality chemical additives with high adhesion prope ies, and pressure strength.

Application areas: Used in filling the cavities in the joints of prefabricated elements, in the determination of the connection elements of industrial machines, in the joints of steel elements with concrete elements such as bolt, pin, in road and bridge connections, in filling cavities of reinforced concrete structures and columns.

Natural Hydraulic Lime
A special product with no cement in the formula designed for historic structures. It is natural hydraulic lime produced for use
as a binder in the manufacture of brickdust mortar.

Application areas: It is used as a binder in renovating or strengthening historic masonry structures, fixing cracks in masonry domes and vaults,
laying bricks, stones, and walls in existing historic buildings, plastering in structures requiring high water vapor permeability, and
restoration applications including moar, joint, and repair works in buildings, as well as preparing moar for joint production.

Natural Hydraulic Lime- Based Interior and Exterior Plaster Mortar
A natural hydraulic lime-based plaster material without cement, used to achieve a smooth suace in historic masonry
structures.

Application areas: It is used for surface leveling on hydraulic lime plaster surfaces, repairing natural stones, bricks, and wall joints, and
filling surface voids up to 1.5 cm

Natural Hydraulic Lime- Based Injection Mortar
An injection moar developed for historic masonry structures, containing pozzolanic lime and micronized carbonates. It does
not contain cement or soluble salts (alkalines, sulfates, chlorides, or nitrates).

Application areas: It is used for restoring lost load-bearing capacities of stone, brick, or mixed walls, repairing or strengthening historic masonry
structures, repairing cracks in masonry domes and vaults, providing a foundation for existing historic masonry walls, filling large
voids, and repairing and strengthening cracks in walls located in sulfate-rich environments.